Skip to content
  • There are no suggestions because the search field is empty.

Available now

LuxOS is live on the Antminer Z15 Pro.

Zcash miners get a 14.4% sustained overclock beyond stock spec, installed through Luxor Commander's free Lite plan.

Install with Commander Read the install guide

Install in four steps

  1. Log in or sign up on the Luxor Platform.
  2. Open Commander from the left sidebar and choose the free Lite plan.
  3. Set up an Agent on a Linux or Windows computer on the same network as your miners.
  4. Select your Z15 Pros in the Miners tab and run Install LuxOS from Bulk Actions.

Before you start: LuxOS supports Z15 Pros with a Xilinx control board and BEZ36501 hashboards, running stock Bitmain firmware. Check compatibility

840 KSol/s Antminer Z15 Pro stock spec
+14.4% Sustained overclock vs stock
~$5/day Net gain per machine*

What running stock leaves on the table

A stock Z15 Pro hashes at 840 KSol/s. Our test machine on LuxOS is holding about 991 KSol/s. Here's what that difference is worth after paying for the extra power and the LuxOS fee.

Run the numbers for your fleet

LuxOS versus stock firmware on the Antminer Z15 Pro, after paying for the extra power and the LuxOS fee.

Change assumptions

Net gain with LuxOS

+$500per day

+$14,988 every 30 days

Extra ZEC, 30 days
+17.7 ZEC
Extra hashrate
+15.1 MSol/s
Extra power needed
+125.2 kW

Net earnings over the first 90 days after install

  • LuxOS
  • Stock firmware
  • What stock leaves behind

Estimates, not guarantees. Assumes ZEC at $1,200 and power at $0.07/kWh, Zcash network hashrate of 30 GSol/s, a 1.25 ZEC miner reward per block, and the standard 2.8% LuxOS fee, before pool fees. LuxOS figures come from our test machine at about 991 KSol/s and 4,032 W, against Bitmain's stock spec of 840 KSol/s at about 2,780 W. Results change with ZEC price, network difficulty, and your power cost. Confirm PSU, circuit, and cooling headroom before overclocking. Figures as of October 9, 2026.

What you'll see in LuxOS

LuxOS reports performance for every Z15 Pro down to the chip. These screens are from one of our own test machines.

LuxOS dashboard for an Antminer Z15 Pro showing 990.98 KSol/s hashrate, 4,032 W power, 0% rejection rate, and three healthy hashboards.
A Z15 Pro on LuxOS holding close to 1,000 KSol/s across the day, with 0% rejects and all 18 chips healthy. We quote 14.4% because it's the number we're confident it sustains.
LuxOS performance view showing per-chip hashrate for all three Z15 Pro hashboards, every chip above 90% of target.
Hashrate for every chip across all three hashboards.
LuxOS performance view showing chip health scores for all three Z15 Pro hashboards, every chip in the healthiest band.
Chip-level health scoring, now on Equihash.

What LuxOS brings to the Z15 Pro

Every reading below comes from our Z15 Pro test machine.

991KSol/s on LuxOS 840 KSol/s stock spec

Overclocking beyond stock spec

Run the Z15 Pro past its 840 KSol/s rating. Our test machine holds close to 1,000 KSol/s across the day.

Performance profiles

Pick the profile that fits your power and cooling, from efficiency to overclock.

Per-hashboard monitoring

Voltage, frequency, hashrate, and temperatures for each board.

Chip-level health scoring

Spot a weak chip before it drags down the board.

On-die chip temperatures

Temperature readings from each chip's own sensor, not just the board.

The full LuxOS toolkit

The same firmware Bitcoin fleets already run, now on Equihash.

Questions before you install

  • Do I need to pay for Commander? No. The free Commander Lite plan covers installing, updating, and configuring LuxOS across your fleet.
  • Does LuxOS have a fee? Yes, the standard 2.8% LuxOS fee. Every net gain figure on this page already accounts for it.
  • Can I keep my current fleet manager? Yes. Commander gets LuxOS onto your miners, and tools like Foreman take it from there through LuxOS's CGMiner-compatible API.
  • Will I need to redo my pool settings? No. LuxOS keeps each miner's network and pool configuration during install.
  • Can I go back to stock firmware? Yes. Commander can uninstall LuxOS and return your miners to stock firmware in bulk.

Every day on stock firmware is ZEC you don't get back.

LuxOS for the Z15 Pro is live. Install it from Luxor Commander's free Lite plan.

Install LuxOS now Read the install guide

*Estimates, not guarantees. Based on our test machine holding about 991 KSol/s at 4,032 W, against Bitmain's stock spec of 840 KSol/s at about 2,780 W. Assumes ZEC at $1,200, Zcash network hashrate of 30 GSol/s, power at $0.07/kWh, a 1.25 ZEC miner reward per block, and the standard 2.8% LuxOS fee, before pool fees. Results change with ZEC price, network difficulty, and your power cost. Overclocking draws more power and produces more heat, so confirm PSU, circuit, and cooling headroom before you raise it. Figures as of October 9, 2026.